**Peer Review Journal ** DOI on demand of Author (Charges Apply) ** Fast Review and Publicaton Process ** Free E-Certificate to Each Author

Current Issues
     2026:7/2

International Journal of Multidisciplinary Research and Growth Evaluation

ISSN: (Print) | 2582-7138 (Online) | Impact Factor: 9.54 | Open Access

Development and deployment of UV-resistant plastic injection molding processes for animal feeder parts

Author(s):

Published:

Volume: 1 | Issue: 1 | Pages: 72-75

Subject: Animal Science

Country: United States

DOI: https://doi.org/10.54660/.IJMRGE.2020.1.1-72-75

License: CC BY 4.0

Full Text (PDF)

Open Access - Free to Download

Download Full Article (PDF)

Abstract

This research paper explores the development and implementation of a UV-resistant manufacturing process for transparent plastic feeder parts designed for animal and bird feeding systems. The project involved resolving issues caused by prolonged outdoor exposure, such as yellowing and material degradation. A unique formulation incorporating UV inhibitors at varied let-down ratios (LDRs) was developed and tested. The process was tailored to ensure five years of UV protection without compromising transparency, aligning with high-tech manufacturing practices in the plastic injection molding industry.

How to Cite This Article

Dhrudipsinh Dabhi (2020). Development and deployment of UV-resistant plastic injection molding processes for animal feeder parts . International Journal of Multidisciplinary Research and Growth Evaluation (IJMRGE), 1(1), 72-75. DOI: https://doi.org/10.54660/.IJMRGE.2020.1.1-72-75

Publication Information

Journal: International Journal of Multidisciplinary Research and Growth Evaluation (IJMRGE)

Publisher: Anfo Publication House

ISSN: (Print), 2582-7138 (Online)

Frequency: Bimonthly

Language: English

Open Access: Yes - This article is distributed under the terms of the Creative Commons Attribution 4.0 International License

Share This Article: